Design of the Smart TV Box Minix Neo U1
It can be said, the design of the Android TV Box of Minix always have the same points in common with each other, towards the simplicity and harmony. Like its predecessors, the Minix Neo X8 (X8, X8-H, X8 Plus, X8-H Plus), the Minix Neo U1 uses a traditional four-sided square design with a MINIX logo printed. sink in the top of the machine.
The most obvious design difference is probably the design change of the peripheral ports, rather than the layout of a USB 2.0 port on the back of the machine and the other two USB ports located at On the side of the Minix Neo U1, all three USB 2.0 ports are provided side-by-side, while the remaining ports like the OTG, Microphone, Headphone, and SPDF are almost unchanged.
One thing that you can easily notice is that instead of using the SD card slot like the Minix X8, the Minix U1 uses a TF card tray that can be used with the MicroSD card, supporting up to 64GB. Overall, in terms of design, Minix Neo U1 retains the traditional design that Minix has applied to its products, if only looking at the look and appearance of the user is not likely to confuse the user. Minix Neo U1 with Minix Neo X8 products earlier.
Highlights of the configuration of Android Box Minix Neo U1
The Minix U1 will use the Amlogic S905 chip, which is probably an upgrade to the cheap Amlogic S805 chips for better performance. Minix Neo U1 CPUs utilize 64-bit Cortex A53 quad-core CPUs and Penta Mali 450 GPUs, supporting a resolution of 3840 × 2160 equivalent to 4K. This new chip is well regarded for handling online tasks. However, to address the need for 4k 60Hz HDPlayer, 10-bit HEVC andAVS + files, DTS audio, Dolby, we will probably have to wait in line. High-end processor "S912".